ปุ่มกดขอความช่วยเหลือฉุกเฉิน

TRANSMITTER/RECEIVER COMMUNICATION SETUP

The Pendant Transmitter must initially identify itself to the system’s receiver by
writing its coded address into the receiver’s address memory. This is accomplished
by performing the following steps:
1. Follow the WRITE MODE procedure described in the Receiver’s Installation
Manual.
2. Send a WRITE message by pressing the transmitter button for at least 3 seconds
until the receiver indicates acceptance of the address code.
3. Follow the Communication Check procedure described in the Receiver Manual.
4. Set the receiver to Normal Mode.