Quad Photobeam Detector

ENFORCER E -964-Q165Q Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security both indoors and outdoors.

Built-in laser beam alignment system speeds accurate, reliable positioning
Multi-frequency (4 channels selectable)
Quad infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
Weatherproof, sunlight-filtering case for indoor & outdoor use
Anti-frost system with built-in heater so that beam functions even in extreme conditions
Automatic input power filtering with special noise rejection circuitry
NO/NC alarm output
N.C. tamper circuit included
Non-polarized power inputs
Quick, easy installation with built-in laser beam and audible alignment system
Built-in alignment strength indicator
Interruption time adjustable for nearly all situations

หมวดหมู่: Outdoor Device, ProSYS Outdoor, Risco ProSYS, ระบบกันขโมยแบบเดินสาย

รายละเอียด

• Multi-frequency: Four selectable beam frequencies to eliminate interference between multiple units for flexible perimeter protection.

• Automatic input power filtering with special noise rejection circuitry.

• Environmental Output: Signal is sent if a degradation in environmental conditions is detected such as thickening fog to prevent false alarms.

• Audible beam alignment (buzzer), beam strength indicator, and laser alignment make transmitter and receiver alignment faster.

• Voltage testing points for fine tuning the beam alignment. Input voltage: 12-24 VDC/VAC (non polarized).

• Delay time adjustable for nearly all applications.

Mode	E-964-165Q	E-964-330Q	E-964-495Q	E-964-660Q
Max. range (outdoor)	165’	330’	495’	660’
Max. range (indoor)	330’	660′	990′	1320′
Current (Tx & Rx)	110mA	115mA	120mA	125mA
Current (Tx & Rx & heaters)	260mA	270mA	280mA	290mA
Input Voltage	12~24VAC/VDC (Non-polarized)
Delay time	50msec~700msec (Variable)
Detection method	All 4 beams simultaneously broken
Selectable beam frequencies	Four (4) channels
Alarm output	Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx)	N.C. switch, 1A @ 120VAC
Environmental output	Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator	5 LEDs indicate signal strength from high to low
Alarm LED (Rx)	Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx)	Green LED – ON – Power is connected.
Laser wavelength	650nm
Laser output power	≤ 5mW
Alignment angle	Horizontal: ±90° , Vertical: ±15°
Operating temperature	-13°~131° F (-25°~55° C)
Heater operation	Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight	5.7 lbs. (2.6kg)
Ingress protection	IP55
Case	PC resin
Dimensions	15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

Mode

E-964-165Q

Max. range (outdoor) : 165’
Max. range (indoor) : 330’
Current (Tx & Rx) : 110mA
Current (Tx & Rx & heaters) : 260mA
Input Voltage : 12~24VAC/VDC (Non-polarized)
Delay time : 50msec~700msec (Variable)
Detection method : All 4 beams simultaneously broken
Selectable beam frequencies : Four (4) channels
Alarm output : Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx) : Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator : 5 LEDs indicate signal strength from high to low
Alarm LED (Rx) : Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx) : Green LED – ON – Power is connected.
Laser wavelength : 650nm
Laser output power : ≤ 5mW
Alignment angle : Horizontal: ±90° , Vertical: ±15°
Operating temperature : -13°~131° F (-25°~55° C)
Heater operation : Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight : 5.7 lbs. (2.6kg)
Ingress protection : IP55
Case : PC resin
Dimensions : 15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

E-964-330Q

Max. range (outdoor) : 330’
Max. range (indoor) : 660′
Current (Tx & Rx) : 115mA
Current (Tx & Rx & heaters) : 270mA
Input Voltage : 12~24VAC/VDC (Non-polarized)
Delay time : 50msec~700msec (Variable)
Detection method : All 4 beams simultaneously broken
Selectable beam frequencies : Four (4) channels
Alarm output : Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx) : Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator : 5 LEDs indicate signal strength from high to low
Alarm LED (Rx) : Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx) : Green LED – ON – Power is connected.
Laser wavelength : 650nm
Laser output power : ≤ 5mW
Alignment angle : Horizontal: ±90° , Vertical: ±15°
Operating temperature : -13°~131° F (-25°~55° C)
Heater operation : Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight : 5.7 lbs. (2.6kg)
Ingress protection : IP55
Case : PC resin
Dimensions : 15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

E-964-495Q

Max. range (outdoor) : 495’
Max. range (indoor) : 990′
Current (Tx & Rx) : 120mA
Current (Tx & Rx & heaters) : 280mA
Input Voltage : 12~24VAC/VDC (Non-polarized)
Delay time : 50msec~700msec (Variable)
Detection method : All 4 beams simultaneously broken
Selectable beam frequencies : Four (4) channels
Alarm output : Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx) : Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator : 5 LEDs indicate signal strength from high to low
Alarm LED (Rx) : Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx) : Green LED – ON – Power is connected.
Laser wavelength : 650nm
Laser output power : ≤ 5mW
Alignment angle : Horizontal: ±90° , Vertical: ±15°
Operating temperature : -13°~131° F (-25°~55° C)
Heater operation : Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight : 5.7 lbs. (2.6kg)
Ingress protection : IP55
Case : PC resin
Dimensions : 15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

E-964-660Q

Max. range (outdoor) : 660’
Max. range (indoor) : 1320′
Current (Tx & Rx) : 125mA
Current (Tx & Rx & heaters) : 290mA
Input Voltage : 12~24VAC/VDC (Non-polarized)
Delay time : 50msec~700msec (Variable)
Detection method : All 4 beams simultaneously broken
Selectable beam frequencies : Four (4) channels
Alarm output : Form “C” relay COM/ N.O./N.C., 1A @ 125VAC/24VDC
Tamper output (Tx & Rx) : Selectable N.O. or N.C., 1A @ 125VAC/24VDC
Beam-strength indicator : 5 LEDs indicate signal strength from high to low
Alarm LED (Rx) : Red LED – ON – Beam is broken or Tx & Rx misaligned.
Power LED (Rx & Tx) : Green LED – ON – Power is connected.
Laser wavelength : 650nm
Laser output power : ≤ 5mW
Alignment angle : Horizontal: ±90° , Vertical: ±15°
Operating temperature : -13°~131° F (-25°~55° C)
Heater operation : Turns ON @ 41°F (5°C), Turns OFF @ 77°F(25°C)
Weight : 5.7 lbs. (2.6kg)
Ingress protection : IP55
Case : PC resin
Dimensions : 15-1/4” x 4-7/16” x 4-11/32” (387 x 113 x 110)

Quad Photobeam Detector

ข้อมูลสินค้า